Спецификация на материал B-499 BRADY THERMAL TRANSFER / DOT MATRIX PRINTABLE NYLON CLOTH LABEL
TDS No. B-499
Effective Date: 12-Jul-2010
Description:
GENERAL
Print Technology: Thermal transfer
Material Type: Polyamide coated nylon cloth
Finish: Matte white
Adhesive: Permanent acrylic
APPLICATIONS
Wiremarking and general labeling applications
B-499 is not recommended for outdoor use.
RECOMMENDED RIBBONS
Thermal Transfer Ribbons
Brady Series R4300, Brady Series R4900, Brady Series R6000, Brady Series R6000HF, Brady Series R6200 and Brady Series R4500 colored (red, blue and green)
Dot Matrix Ribbons
Brady Series R2000 and Brady Series R5000
REGULATORY/AGENCY APPROVALS
UL: B-499 is a UL Recognized Component to UL969 Labelling and Marking Standard when printed with Brady Series R4300, R4900 and R6000 thermal transfer ribbons and R2000 and R5000 dot matrix ribbons. See UL file MH17154 for specific details. UL information can be accessed online at UL.com. Search in Certifications area.
CSA: B-499 is CSA Accepted to C22.2 No.0.15-95 Adhesive Labels Standard when printed with Brady Series R4300 thermal transfer ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa-international.org.
DIN VDE 0472 Part 815: Brady B-499 meets requirements of a halogen-free material per DIN VDE 0472 part 815. (Statement based on review of product construction and confirmation halogen content test run at an independent test laboratory.)
Brady B-499 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC.
Details:
TEST METHODS | AVERAGE RESULTS | |
Thickness | ASTM D 1000 -Substrate -Adhesive -Total | 0.0045 inch (0.115 mm) 0.0020 inch (0.051 mm) 0.0065 inch (0.166 mm) |
Adhesion to: -Stainless Steel -Textured ABS -Polypropylene | ASTM D 1000 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell | 45 oz/inch (50 N/100 mm) 80 oz/inch (88 N/100 mm) 35 oz/inch (39 N/100 mm) 40 oz/inch (44 N/100 mm) 24 oz/inch (26 N/100 mm) 24 oz/inch (26 N/100 mm) |
Tack | ASTM D 2979 Polyken™ Probe Tack (1 second dwell, 1cm/sec separation) | 29 oz (900 grams) |
Drop Shear | PSTC-7 (except use 1/2" x 1" sample) | 9 hours |
Tensile Strength and Elongation | ASTM D 1000 -Machine |
TEST METHOD | TYPICAL RESULTS | |
Short Term High Service Temperature | 5 minutes at 293°F (145°C) | No visible effect to label at 145°C, slight shrinkage at 180°C but label still functional |
Long Term High Service Temperature | 30 days at 193°F (90°C) | No visible effect to label at 90°C, slight discoloration at 110°C but label still functional, at 120°C label is severely discolored |
Low Service Temperature | 30 days at -40°F (-40°C) | No visible effect |
Weatherability* | ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer | Material wrinkled and embrittled |
Humidity Resistance | 30 days at 100°F, 95% R.H. | No visible effect |
UV Light Resistance | 30 days in UV Sunlighter™ 100 | No visible effect |
Abrasion Resistance | Taber Abraser, CS-10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306) | Print still legible at: 150 cycles with R4300, R4900, R6000, R6000HF, R6200, R2000 and R5000 ribbons |
PERFORMANCE PROPERTY | CHEMICAL RESISTANCE |
CHEMICAL REAGENT | SUBJECTIVE OBSERVATION OF VISUAL CHANGE | ||
EFFECT TO LABEL STOCK | R2000 DOT MATRIX RIBBON |
R5000 DOT MATRIX RIBBON |
|
Methyl Ethyl Ketone | Complete unwrap | No visible effect | No visible effect |
1,1,1-Trichloroethane | Complete unwrap | No visible effect | No visible effect |
Isopropyl Alcohol | Complete unwrap | No visible effect | No visible effect |
Mineral Spirits | Complete unwrap | No visible effect | No visible effect |
SAE 20 WT Oil at 70°C | No unwrap, label stained tan | No visible effect | No visible effect |
Mil 5606 Oil | Slight unwrap, label stained red | No visible effect | No visible effect |
Gasoline | Adhesive failure, label discoloration | No visible effect | No visible effect |
Rust Veto® 342 | Moderate unwrap, label discoloration | No visible effect | No visible effect |
Deionized Water | No visible effect | No visible effect | No visible effect |
3% Alconox® Detergent | No visible effect | No visible effect w/o rub, moderate print removal after rub | No visible effect w/o rub, moderate print removal after rub |
10% Sodium Hydroxide Solution | Complete unwrap | No visible effect | No visible effect |
10% Sulfuric Acid Solution | No visible effect | No visible effect | No visible effect |
Northwoods™ Buzz Saw Degreaser | Complete unwrap | No visible effect w/o rub, slight print removal after rub | No visible effect w/o rub, slight print removal after rub |
Speedi Kut Cutting Oil 332 | No unwrap, label stained red | No visible effect | No visible effect |
5% Salt Solution | No visible effect | No visible effect | No visible effect |
Samples printed with Series R4300, R4900, R6000, R6000HF and R6200 thermal transfer ribbons. Samples laminated to aluminum panels and allowed to dwell 24 hours prior to test. Test performed at room temperature except where noted. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.
CHEMICAL REAGENT
|
SUBJECTIVE OBSERVATION OF VISUAL CHANGE
|
||||
R4300
THERMAL TRANSFER RIBBON |
R4900
THERMAL TRANSFER RIBBON |
R6000
THERMAL TRANSFER RIBBON |
R6000HF
THERMAL TRANSFER RIBBON
|
R6200
THERMAL TRANSFER RIBBON |
|
Methyl Ethyl Ketone
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect
|
No visible effect w/o rub, moderate print smear after rub
|
No visible effect w/o rub, slight print smear after rub
|
1,1,1-Trichloroethane
|
No visible effect
|
No visible effect
|
No visible effect
|
Obsolete
|
No visible effect
|
Isopropyl Alcohol
|
No visible effect w/o rub, moderate print removal after rub
|
No visible effect w/o rub, complete print removal after rub
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect
|
No visible effect w/o rub, moderate print removal after rub
|
Mineral Spirits
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
SAE 20 WT Oil at 70°C
|
No visible effect w/o rub, severe print removal after rub
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
Mil 5606 Oil
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
Gasoline
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect w/o rub, slight print smear after rub
|
Rust Veto® 342
|
No visible effect w/o rub, severe print removal after rub
|
No visible effect w/o rub, moderate print removal after rub
|
No visible effect
|
No visible effect
|
No visible effect
|
Deionized Water
|
No visible effect w/o rub, moderate print smear after rub
|
No visible effect w/o rub, severe print removal after rub
|
No visible effect w/o rub, severe print removal after rub
|
No visible effect
|
No visible effect w/o rub, slight print removal after rub
|
3% Alconox® Detergent
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect w/o rub, severe print removal after rub
|
No visible effect w/o rub, moderate print removal after rub
|
No visible effect w/o rub, slight print smear after rub
|
No visible effect w/o rub, slight print removal after rub
|
10% Sodium Hydroxide Solution
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect w/o rub, slight print smear after rub
|
No visible effect
|
10% Sulfuric Acid Solution
|
No visible effect w/o rub, moderate smear after rub
|
No visible effect w/o rub, moderate print removal after rub
|
No visible effect
|
No visible effect w/o rub, slight print removal after rub
|
No visible effect w/o rub, slight print removal after rub
|
Northwoods™ Buzz Saw Degreaser
|
No visible effect w/o rub, moderate print removal after rub
|
No visible effect w/o rub, print illegible after rub
|
No visible effect w/o rub, severe print removal after rub
|
No visible effect w/o rub, moderate print removal after rub
|
No visible effect w/o rub, slight print removal after rub
|
Speedi Kut Cutting Oil 332
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
5% Salt Solution
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect
|
No visible effect w/o rub, slight print removal after rub
|
Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F (27°C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.
Trademarks:
Alconox® is a registered trademark of Alconox Co.
BradyPrinter™ is a trademark of Brady Worldwide, Inc.
I.D. Pro® is a registered trademark of Brady Worldwide, Inc.
Northwoods™ is a trademark of the Superior Chemical Corporation.
Polyken™ is a trademark of Testing Machines Inc.
Rust Veto® is a registered trademark of the E.F. Houghton & Co.
Sunlighter™ is a trademark of the Test Lab Apparatus Company
ASTM: American Society for Testing and Materials (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
UL: Underwriters Laboratories Inc. (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.
Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.
Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.
WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.